print
  • [CPU] CP
    • Features

      • PID Control
        • Operates 32Loops PID without PID module.
      • RTC (Except CP*A type)
        • Reads time from RTC and saves it in the F memory device.
      • Input and Output Reservation
        • Scans and detects module at the designated slot.
        • Refers to reservation function which writes a program without I/O change in case of extension,
          damage or module replacement.
      • Online Edit
        • Scan program can be edited when CPU is RUN mode(Online).
      • RS-232 Port (XPnB, CP3C, CP3E, CP4E/F)
      • RS-422/485 Port (CP4D/U, CP4F)

      Self-Diagnostic Functions

      • Watch-Dog Timer
        • Detects delayed operation error in the program.
      • Module installation in Slot
        • Detects whether the module is installed in the slot.
      • Memory Error
        • In case of Error in Flash memory of CPU module or Dual Port Ram of the Special module, the rrror will save
          in an F memory device.
      • Battery Error
        • If the battery goes down under standard voltage, F3.4 will be turned ON.
      • Power Error
        • If the input voltage to Power module is lower than standard range, RUN and STOP lamp will blink.
  • Performance Specification
    • Performance Specification
      Items Specification
      CM1-CP3A/B/P/U CM1-CP4A/B/C/D/U
      Program Control Method Stored Program, Cyclic operation, Time Driven Interrupt
      I/O Control Method Indirect and Directed by instruction
      Program Language IL(Instruction List), LD(Ladder Diagram), FBD(Function Block Diagram)
      FBD Extension – CP3E,4E,4F only
      SFC(Sequential Function Chart) – CP3E,4E,4F only
      Data Processing Method 32 Bit
      Instructions Sequence 55 Instruction
      Application 293 Instruction
      Processing speed 200ns / Step (Sequence)
      Program Capacity 32K Step 16K Step
      512Kbyte 256Kbyte
      BASE Extension Extendable (Maximum 16 Bases) Not Extendable
      Data memory capacity 512Kbyte 256Kbyte
      Device Memory X 1,024 384
      Y
      M 8,192
      K 2,048
      L 2,048
      F 2,048
      T 1,024(Select 10ms or 100ms)
      C 1,024
      S 100Card * 100Step
      D 10,000 5,000
      Z 1,024
      Q 512 words (CP3E, CP4E/F only)
      R 16 words
      Timer Types On delay, Off Delay, Integration, Monostable, Retriggerable
      Time range 0.01sec ~ 6,553.5sec
      Counter Types Up Counter, Down Counter, Up-Down Counter, Ring Counter
      range -32,768 ~ +32,767
      Operation modes LOCAL or REMOTE (RUN, STOP, PAUSE MODE)
      Self-Diagnosis Watchdog timer, Memory error, I/O error, Battery error, Power error detection
      Battery Back-up Over 8 years
      Built-in Function
      • Computer Link
        – RS232C: A/B/P/U type
        – USB 2.0: E/F/U type
      • Program Editable on Run Mode
      • Clock (RTC, except A type)
      • PID Control (32 Loops)
      • RS-232 1CH (optional)
      • RS-422/485 1CH(optional)
      • I/O Reservation